Home

10

PLASTIC COVER for UP, see-through, against the dust, uv-light repellent

2200 x 1200 mm
Quantity unit: piece
UM: piece
€3.25

100

HAMMER SHANKS, birch

Ø 5,75 mm Length 130 mm
Quantity unit: set
UM: set
€44.07

1000

CALIBRE, brass 1/10

Measuring range till 100 mm
Quantity unit: piece
UM: piece
€18.20

1001-A

SPRING SCALE for measuring springs and pins

0,6 - 6 gr
Quantity unit: piece
UM: piece

ONLY ON ORDER

€288.60

1001-B

SPRING SCALE for measuring springs and pins

1,5 - 15 gr
Quantity unit: piece
UM: piece
NOT AVAILABLE AT THE MOMENT
€279.50

1001-C

SPRING SCALE for measuring springs and pins

3 - 30 gr
Quantity unit: piece
UM: piece

ONLY ON ORDER

€286.00

1002

HAMMERHEADS PROTRACTOR, polished scale

Quantity unit: piece
UM: piece

NOT AVAILABLE AT THE MOMENT

€35.75

1003

DIAL THICKNESS GAUGE

Ø 30 mm  Depth 300 mm
Reading 0,1 mm
Quantity unit: piece
UM: piece
€292.50

1003-A

POCKET THICKNESS GAUGE, with handle and lifting lever

Ø 12 mm
Quantity unit: piece
UM: piece
€90.35

1003-B

POCKET THICKNESS GAUGE, with handle and lifting lever

Ø 12 mm
Quantity unit: piece
UM: piece

NOT AVAILABLE AT THE MOMENT

€101.40

1004

CUTTERS for centre pins

Quantity unit: piece
UM: piece
€46.80

1007

FLANGE SPACER

Quantity unit: piece
UM: piece
€28.47

1008

PLIERS

Length 140 mm
Quantity unit: piece
UM: piece
NOT AVAILABLE AT THE MOMENT


€19.63

101

HAMMER SHANKS, birch

Ø 5,40 mm
Length 130 mm
Quantity unit: set
UM: set
€34.06

1011

MUSIC WIRE CUTTER cuts with smooth finish and adjustable clamping fixture which holds the material being cut perpendicular to the cutter jaws

Quantity unit: piece
UM: piece
€69.55

1012

PIANO WIRE CUTTERS

Length 180 mm
Quantity unit: piece
UM: piece
NOT AVAILABLE AT THE MOMENT
€50.05

1014

FLAT NOSE PLIERS

Length 160 mm
Quantity unit: piece
UM: piece
€44.85

1016

PLIERS for tuning pin bushing

Quantity unit: piece
UM: piece
€50.05

1017

PLIERS for WIRE BENDING allows to bend action wires and flanges for Viennese to the left and to the right, with multiplier

Quantity unit: piece
UM: piece
€51.35

1017-A

PLIERS for FLANGES, Viennese

Quantity unit: piece
UM: piece
€42.25

102

HAMMER SHANKS, kotibe

Ø 5,75 mm
Length 130 mm
Quantity unit: set
UM: set
€39.85

102-A

HAMMER SHANKS, kotibe

Ø 5,40 mm Length 130 mm
Quantity unit: set
UM: set
€35.26

1021

PLIERS for WIRE BENDING allows to bend action wires to the left and to the right, with multiplier

Quantity unit: piece
UM: piece
€77.87

1022

PLIERS for WIRE BENDING allows forward or backward bending of brindle wires

Quantity unit: piece
UM: piece
€113.75

1023

ANGLE SCISSOR, extra steel
Quantity unit: piece
UM: piece
€23.40

1024

HAMMER SHANK CUTTER, razon sharp blade allows for fast, easy efficient cutting to length hammer shanks
Quantity unit: piece
UM: piece
€17.55

1024-A

PLIER for cutting shank Hammer, locking device
Quantity unit: piece
UM: piece
€12.74

1025

CENTER PIN PLIER constructed to have perfect parallel action to remove and be able to place center pins, without tearing the felt bushing. It comes with an inserter pin and an adjustable extracting pin assembly
Quantity unit: piece
UM: piece
€97.50

1026

REPLACEMENT INSERTER PIN (for art. 1025)

Quantity unit: piece
UM: piece
€4.88

1027

PARALLEL PLIER for setting dampers in grand actions, grip plastic covered

Length 195 mm
Quantity unit: piece
UM: piece
€37.96

1028

PARALLEL PLIER, can be used in spacing action parts like back checks, hammer heads ecc., grip plastic covered

Length 195 mm   Opening approx. 9 mm
Quantity unit: piece
UM: piece
€64.35

1029

FLAT NOSE PLIERS (economic type)

Quantity unit: piece
UM: piece
€55.77

103-A

JACK CHECK FELT, butt felt, red
Thickness 3,0 mmQuantity unit: set
UM: set
€5.72

103-B

JACK CHECK FELT, butt felt, red
Thickness 3,5 mmQuantity unit: set
UM: set
€5.85

103-C

JACK CHECK FELT, butt felt, red
Thickness 4,0 mmQuantity unit: set
UM: set
€5.88

1030

FLAT NOSE PLIERS

Quantity unit: piece
UM: piece
€109.20

1031

DAMPER WEDGE EASING PLIER

Quantity unit: piece
UM: piece
€69.55

1032

FLAT NOSE PLIERS, parallel /key easing pliers

Quantity unit: piece
UM: piece
€94.90

1034

FLAT NOSE PLIERS, parallel /key easing pliers to quickly work either side of the key without removing the key from the piano

Quantity unit: piece
UM: piece
€82.55

1035

SOUNDBOARD CARVING TOOL

Quantity unit: piece
UM: piece
€58.37

1035-A

SOUNDBOARD CARVING TOOL, new 'L' base

Quantity unit: piece
UM: piece
€37.57

1036

ROLLER for removing knuckles from grand hammer shanks
Quantity unit: piece
UM: piece
€25.74

1039

PLIER for extracting GP hammerheads, burnished steel grip
Quantity unit: piece
UM: piece
€50.70

104

HAMMER BUTT CUSHION FELT, strips, red

Length 130 mm  Width 0,9 mm  Thickness 5 mm
Quantity unit: piece
UM: piece
€5.20

104-A

HAMMER BUTT CUSHION FELT, strips, red

Length 130 mm  Width 0,9 mm  Thickness 3,5 mm
Quantity unit: piece
UM: piece
€5.46

1040

COMBINATION TOOL HANDLE, octagon plastic multi-purpose handle that fits the entire set of regulating tools. Tools are secured and released by slight of compressing nut

Quantity unit: piece
UM: piece
€50.18

1040-A

ROSEWOOD COMBINATION HANDLE, octagon rosewood multi-purpose handle that fits the entire set of regulating tools. Tools are secured and released by slight of compressing nut

Quantity unit: piece
UM: piece
€42.25

1040-B

REGULATING SCREWDRIVER for regulating screws (UP), flexible - type: long

Length 285 mm
Quantity unit: piece
UM: piece
€21.45

1040-BP

REGULATING SCREWDRIVER for regulating screws (UP), flexible version - type: short

Length 215 mm
Quantity unit: piece
UM: piece
€21.45

1040-BS

REGULATING SCREWDRIVER for regulating bottons (GP), flexible version - type: long

Length 285 mm
Quantity unit: piece
UM: piece
€21.45

1040-BST

REGULATING SCREWDRIVER for regulating bottons (GP), flexible version - type: short

Length 215 mm
Quantity unit: piece
UM: piece
€21.45

1040-C

REGULATING SCREWDRIVER for flathead screws, flexible version - type: long

Length 285 mm
Quantity unit: piece
UM: piece
€22.10

1040-CP

REGULATING SCREWDRIVER for flathead screws, flexible version - type: short

Length 215 mm
Quantity unit: piece
UM: piece
€22.10

1040-D

HAMMER BUTT and WHIPPEN SPACER - type: long

Quantity unit: piece
UM: piece
€23.40

1040-DK

HAMMER BUTT and WHIPPEN SPACER - type: short

Quantity unit: piece
UM: piece
€24.05

1040-E

OFFSET KEY SPACER for oval key pins. The offset makes it easy to reach past the front row of key pins when twisting or bending pins under the sharp keys

Quantity unit: piece
UM: piece
€22.75

1040-EK

REGULATOR for oval key pins, 'L' form

Quantity unit: piece
UM: piece
€24.64

1040-F

SPOON BENDER (UP) for ease in adjusting the spoon. The angle of this tool facilities getting under and around the whippens without removing the piano action

Quantity unit: piece
UM: piece
€25.35

1040-G

CAPSTAN SCREW BENDER

Quantity unit: piece
UM: piece
€27.30

1040-H

DAMPER WIRE BENDER

Quantity unit: piece
UM: piece
€26.00

1040-J

SPOON BENDER (UP)

Quantity unit: piece
UM: piece
€26.00

1040-K

BACK CHECK BENDER

Quantity unit: piece
UM: piece
€22.10

1040-L

DAMPER WIRE BENDER, curved head 45°

Quantity unit: piece
UM: piece
€20.80

1040-LX

BENT TOOL, fine shank, ideal to intervene where there are little spaces between the rods of the mechanical

Quantity unit: piece
UM: piece
€23.40

1040-LX

BENT TOOL, fine shank, ideal to intervene where there are little spaces between the rods of the mechanical

Quantity unit: piece
UM: piece
€20.80

1040-M

DAMPER WIRE BENDER, straight head

Quantity unit: piece
UM: piece
€20.15

1040-N

DAMPER WIRE BENDER, curved head 90°

Quantity unit: piece
UM: piece
€20.15

1040-P

DAMPER WIRE BENDER, head with multidirectional hollows

Quantity unit: piece
UM: piece
€24.70

1040-Q

SPOON BENDER (UP), curved

Quantity unit: piece
UM: piece
€29.25

1040-R

SCREWDRIVER for slitted screws

Length 245 mm
Quantity unit: piece
UM: piece
€26.65

1040-S

SCREWDRIVER for slitted small screws

Length 125 mm
Quantity unit: piece
UM: piece
€16.77

1040-T

SCREWDRIVER for Philips screws

Length 350 mm
Quantity unit: piece
UM: piece
€26.65

1040-TC

SCREWDRIVER for Philips screws

Length 275 mm
Quantity unit: piece
UM: piece
€25.35

1040-V

SPOON BENDER (UP), straight

Quantity unit: piece
UM: piece
€24.05

1040-XK

FACETED TOOL slightly inclined to bend the rods of the dampers or anything else that may require a particular equipment

Quantity unit: piece
UM: piece
€24.70

1040-XKL

STRAIGHT FACETED TOOL to bend the rods of dampers - generic regulation

Quantity unit: piece
UM: piece
€22.10

1040-Z

DAMPER WIRE BENDER

Quantity unit: piece
UM: piece
€22.75

1045-B

REGULATING SCREWDRIVER for regulating screws (UP), wooden handle, flexible - type: long

Length 285 mm
Quantity unit: piece
UM: piece
€22.75

1045-BP

REGULATING SCREWDRIVER for regulating screws (UP), wooden handle, flexible - type: short

Length 215 mm
Quantity unit: piece
UM: piece
€22.75

1045-BS

REGULATING SCREWDRIVER for regulating bottons (GP), wooden handle, flexible version - type: long

Length 285 mm
Quantity unit: piece
UM: piece
€22.75

1045-BST

REGULATING SCREWDRIVER for regulating bottons (GP), wooden handle, flexible version - type: short

Length 215 mm
Quantity unit: piece
UM: piece
€22.75

1045-C

REGULATING SCREWDRIVER for flathead screws, wooden handle, flexible version - type: long

Length 285 mm
Quantity unit: piece
UM: piece
€23.40

1045-CP

REGULATING SCREWDRIVER for flathead screws, wooden handle, flexible version - type: short

Length 215 mm
Quantity unit: piece
UM: piece
€23.40

1045-D

HAMMER BUTT and WHIPPEN SPACER, wooden handle - type: long

Quantity unit: piece
UM: piece
€24.70

1045-DK

HAMMER BUTT and WHIPPEN SPACER, wooden handle - type: short

Quantity unit: piece
UM: piece
€24.05

1045-E

REGULATOR for key pins, wooden handle, bent

Quantity unit: piece
UM: piece
€24.05

1045-EK

REGULATOR for oval key pins, 'L' form, wooden handle, curved

Quantity unit: piece
UM: piece
€21.45

1045-EKL

REGULATOR for guide pins, front row of key pins, wooden handle, straight

Quantity unit: piece

UM: piece

€33.15

1045-F

SPPON BENDER (UP), wooden handle, curved

Quantity unit: piece
UM: piece
€20.80

1045-G

CAPSTAN SCREW BENDER, wooden handle

Quantity unit: piece
UM: piece
€27.30

1045-H

DAMPER WIRE BENDER, wooden handle

Quantity unit: piece
UM: piece
€27.30

1045-J

SPOON BENDER, wooden handle, curved

Quantity unit: piece
UM: piece
€27.30

1045-K

BACK CHECK BENDER, wooden handle

Quantity unit: piece
UM: piece
€23.40

1045-L

DAMPER WIRE BENDER, wooden handle, curved head 45°

Quantity unit: piece
UM: piece
€21.45

1045-LX

BENT TOOL, fine shank, ideal to intervene where there are little spaces between the rods of the mechanical

Quantity unit: piece
UM: piece
€22.75

1045-M

DAMPER WIRE BENDER, wooden handle, straight head

Quantity unit: piece
UM: piece
€20.80

1045-N

DAMPER WIRE BENDER, wooden handle, curved head 90°

Quantity unit: piece
UM: piece
€20.80

1045-P

DAMPER WIRE BENDER, wooden handle, multidirectional hollows

Quantity unit: piece
UM: piece
€27.30

1045-Q

SPOON BENDER (UP), wooden handle, curved

Quantity unit: piece
UM: piece
€27.30

1045-R

SCREWDRIVER for slitted screws, wooden handle

Length 245 mm
Quantity unit: piece
UM: piece
€29.25
Product added to wishlist
Product added to compare.