Tools

1143-A

HAMMER SHANK SPACER

Quantity unit: piece
UM: piece
ONLY ON ORDER
€22.75

1144

GAUGE, metal, 20 blades

0,05 - 0,10 - 0,15 etc. till 1,00 mm
Quantity unit: piece
UM: piece
€10.27

1145

SCREWCUTTING COUNTER whitworth metrici ISO whitworth Gas

52 files
Quantity unit: piece
UM: piece
€11.57

1146-A

SCREWDRIVER

Length of the cut 6 mm Length 120 mm
Quantity unit: piece
UM: piece
NOT AVAILABLE AT THE MOMENT
€12.35

1146-B

SCREWDRIVER

Length of the cut 7 mm Length 120 mm
Quantity unit: piece
UM: piece

NOT AVAILABLE AT THE MOMENT

€12.35

1148

SCREWDRIVER, cross, 'Phillips'
Quantity unit: piece
UM: piece
€4.75

1149-A

SCREWDRIVER, 'Phillips', chromium vanadium, extra-long, cross

Ø 6,0 mm  Length 400 mm
Quantity unit: piece
UM: piece
€12.35

1149-B

SCREWDRIVER, chromium vanadium, extra-long, slit

Ø 5,0 mm  Length 400 mm
Quantity unit: piece
UM: piece

NOT AVAILABLE AT THE MOMENT

€11.05

1149-C

SCREWDRIVER, chromium vanadium, extra-long, slit

Ø 4,0 mm  Length 400 mm
Quantity unit: piece
UM: piece
€10.40

1150-A

SCREWDRIVER, for small screws, slit 0,4 mm

Ø 2,5 mmLength 165 mmQuantity unit: piece
UM: piece
€10.40

1150-B

SCREWDRIVER Pozidriv
Ø 3,5 mmLength 150 mmQuantity unit: piece
UM: piece
€11.05

1151

SCREWDRIVER Pozidriv, chromium vanadium, slit
Ø 6,0 mmLength 205 mmQuantity unit: piece
UM: piece
€15.60

1152-A

SCREWDRIVER Pozidriv, chromium vanadium, slit
Ø 6,5 mm x 1,2 mmLength 255 mmQuantity unit: piece
UM: piece
€13.65

1152-B

SCREWDRIVER Pozidriv, chromium vanadium, slit
Ø 8,0 mm x 1,2 mmLength 295 mmQuantity unit: piece
UM: piece
€19.24

1153

EASY LIFT braking system that allows you to close the cover top with minimal effort

Quantity unit: piece
UM: piece

ONLY ON ORDER

€325.00

1153-A

DEVICE for holding UP lids open, while tuning or servicing the piano, inside brass - outside felt, it holds the piano lid at 45º when you are tuning

Quantity unit: piece
UM: piece
€21.45

1154

UP KEYBOARD LID PROTECTOR it's not necessary to drill or screw it, just apply and stays in place with adhesive tape (easily removable)

Quantity unit: piece
UM: piece
€36.40

1155

UP KEYBOARD LID PROTECTOR is installed by piercing the hinge and the support of the cylinder (10 cm approx.), with a wood bit Ø 13 mm; same operation in the cylinder with a 4 mm drill bit.

Quantity unit: piece
UM: piece
€127.40

1155-A KIT

KIT for the installation of the keyboard lid protector (sold separately)

Quantity unit: set
UM: set
€39.00

1156

GP KEYBOARD LID PROTECTOR

Quantity unit: set 4 pieces
UM: piece
NOT AVAILABLE AT THE MOMENT
€62.40

1156-A

PUNCHES for front rail washers (with center pin)

Ø 12 mm
Quantity unit: piece
UM: piece
€70.85

1156-B

PUNCHES for front rail washers (with center pin)

Ø 20 mm
Quantity unit: piece
UM: piece
€83.20

1156-C

PUNCHES SET

For holes Ø 3 ÷ 20 mm
Quantity unit: set
UM: set
€141.70

1156-D

PUNCHES SET

For holes Ø 3 ÷ 30 mm
Quantity unit: set
UM: set

€218.40

1157-A

PLUG CUTTER
Ø 10 mmQuantity unit: piece
UM: piece
€77.35

1157-B

PLUG CUTTER
Ø 11 mmQuantity unit: piece
UM: piece
€127.40

1157-C

PLUG CUTTER

Ø 12 mm
Quantity unit: piece
UM: piece

NOT AVAILABLE AT THE MOMENT

€84.50

1157-D

PLUG CUTTER
Ø 13 mmQuantity unit: piece
UM: piece
€127.40

1157-E

PLUG CUTTER
Ø 14 mmQuantity unit: piece
UM: piece
€84.50

1158-08

DRILLS

Ø 8 mm
Length 120 - 150 mm
Quantity unit: piece
UM: piece
€21.97

1158-10

DRILLS
Ø 10 mm Length 120 - 150 mmQuantity unit: piece
UM: piece
€12.68

1158-11

DRILLS

Ø 11 mm Length 120 - 150 mmQuantity unit: piece
UM: piece
€23.97

1158-12

DRILLS
Ø 12 mm Length 120 - 150 mmQuantity unit: piece
UM: piece
€14.30

1158-13

DRILLS

Ø 13 mm Length 120 - 150 mmQuantity unit: piece
UM: piece
€29.25

1158-14

DRILLS
Ø 14 mm Length 120 - 150 mmQuantity unit: piece
UM: piece
€16.25

1160-A

Cylindrical GROUND TIPS HSS DIN 338 ø 2,5 mm ideal for drilling or grinding hammer butts or flanges

€1.95

1160-B

Cylindrical GROUND TIPS HSS DIN 338 ø 2,0 mm ideal for drilling or grinding hammer butts or flanges

€1.89

1160-C

Cylindrical GROUND TIPS HSS DIN 338 ø 1,5 mm ideal for drilling or grinding hammer butts or flanges

€1.95

1160-D

Cylindrical GROUND TIPS HSS DIN 338 ø 1,0 mm ideal for drilling or grinding hammer butts or flanges

€2.34

1160-E

Cylindrical GROUND TIPS HSS DIN 338 ø 0,75 mm ideal for drilling or grinding hammer butts or flanges

€2.54

1162

BROACH for GP, conical
Ø 4,9 < 6,36 mmQuantity unit: piece
UM: piece
€52.65

1164

ADD-ON COUNTERSINK BIT, for woodSet:7 tips Ø 3 - 4 - 5 - 6 - 7 - 8 - 10 mm

Quantity unit: set
UM: set
€15.60

1166-6,30

SPIRAL DRILL for WREST PLANK, extra long
Ø 6,30 mmQuantity unit: piece
UM: piece
€11.05

1166-6,40

SPIRAL DRILL for WREST PLANK, extra long
Ø 6,40 mmQuantity unit: piece
UM: piece
€6.30

1166-6,50

SPIRAL DRILL for WREST PLANK, extra long
Ø 6,50 mmQuantity unit: piece
UM: piece
€6.50

1166-6,60

SPIRAL DRILL for WREST PLANK, extra long

Ø 6,60 mm
Quantity unit: piece
UM: piece
NOT AVAILABLE AT THE MOMENT

1166-6,70

SPIRAL DRILL for WREST PLANK, extra long

Ø 6,70 mm
Quantity unit: piece
UM: piece
€14.17

1166-6,80

SPIRAL DRILL for WREST PLANK, extra long
Ø 6,80 mmQuantity unit: piece
UM: piece
€14.95

1166-6,90

SPIRAL DRILL for WREST PLANK, extra long
Ø 6,90 mmQuantity unit: piece
UM: piece
€15.34

1166-7,00

SPIRAL DRILL for WREST PLANK, extra long
Ø 7,00 mmQuantity unit: piece
UM: piece
€7.80

1167

KEY BUSHING TOOL helps to replace the balance key bushing

Quantity unit: piece
UM: piece
€38.87

1168

KEY BUSHING WEDGE CLAMP it allows for faster and more professional looking rebushing jobs. It can be used on both the center and the front key bushing

Quantity unit: piece
UM: piece
€1.63

1169

BUSH MASTER, an efficient way to replace front key bushings

Quantity unit: piece
UM: piece
NOT AVAILABLE AT THE MOMENT
€84.37

1169-A

REPLACEMENT BLADE (for art. 1169)

Quantity unit: piece
UM: piece
€6.63
1170-0
  • New

1170-0

WEDGES FOR KEY BUSHING, blue

Thickness 3,2 mm
Quantity unit: piece
UM: piece
€1.43

1170-A

WEDGES FOR KEY BUSHING, synthetic material, yellow

Thickness 3,5 mm
Quantity unit: piece
UM: piece
€1.43

1170-B

WEDGES FOR KEY BUSHING, synthetic material, blue

Thickness 3,6 mm
Quantity unit: piece
UM: piece
€1.43

1170-C

WEDGES FOR KEY BUSHING, synthetic material, red

Thickness 3,7 mm
Quantity unit: piece
UM: piece
€1.43

1172-A

FLAT WEDGES for gluing the kasimir seals of the keyboard center

Length 35 mm  Width 8 mm  Thickness 3,4 mm
Quantity unit: piece
UM: piece
NOT AVAILABLE AT THE MOMENT

1172-B

FLAT WEDGES for gluing the kasimir seals of the keyboard center

Length 35 mm  Width 8 mm  Thickness 3,5 mm
Quantity unit: piece
UM: piece

NOT AVAILABLE AT THE MOMENT

1172-C

FLAT WEDGES for gluing the kasimir seals of the keyboard center

Length 35 mm  Width 8 mm  Thickness 3,6 mm
Quantity unit: piece
UM: piece
NOT AVAILABLE AT THE MOMENT

1172-D

FLAT WEDGES for gluing the kasimir seals of the keyboard center

Length 35 mm  Width 8 mm  Thickness 3,7 mm
Quantity unit: piece
UM: piece
€1.43

1172-E

FLAT WEDGES for gluing the kasimir seals of the keyboard center

Length 35 mm  Width 9 mm  Thickness 3,4 mm
Quantity unit: piece
UM: piece
€1.43

1172-F

FLAT WEDGES for gluing the kasimir seals of the keyboard center

Length 35 mm  Width 9 mm  Thickness 3,5 mm
Quantity unit: piece
UM: piece

NOT AVAILABLE AT THE MOMENT

1172-G

FLAT WEDGES for gluing the kasimir seals of the keyboard center

Length 35 mm  Width 9 mm  Thickness 3,6 mm
Quantity unit: piece
UM: piece
€1.43

1172-H

FLAT WEDGES for gluing the kasimir seals of the keyboard center

Length 35 mm  Width 9 mm  Thickness 3,7 mm
Quantity unit: piece
UM: piece
€1.43

1180

ROTARY CUTTER, with changeable blade
Quantity unit: piece
UM: piece
€25.35

1180-A

REPLACEMENT BLADE (for art. 1180)

Quantity unit: piece
UM: piece
€11.57

1181

ROTARY CUTTER, with changeable blade, small

Quantity unit: piece
UM: piece
€21.58

1181-A

REPLACEMENT BLADE, small (for art. 1181)
Quantity unit: piece
UM: piece
€11.05

1183

HAMMER HEAD BORING DEVICE - NEW VERSION, professional

Quantity unit: piece
UM: piece
€1,293.50

1184

WOODEN PART for drilling support
Quantity unit: piece
UM: piece
€1.04

1185

HAMMER HEAD PROTRACTOR, for bass or treble, plastic
Quantity unit: piece
UM: piece
€12.16

1186

HAMMER HEAD PROTRACTOR, metal

Quantity unit: piece
UM: piece
€35.75

1188-A

WOODEN BITS for drilling the hammer heads

Ø 5,1 mm
Quantity unit: piece
UM: piece

NOT AVAILABLE AT THE MOMENT

€38.35

1188-B

WOODEN BITS for drilling the hammer head

Ø 5,2 mm
Quantity unit: piece
UM: piece
€38.35

1188-C

WOODEN BITS for drilling the hammer heads

Ø 5,3 mm
Quantity unit: piece
UM: piece
€38.35

1188-D

WOODEN BITS for drilling the hammer heads

Ø 5,4 mm
Quantity unit: piece
UM: piece

NOT AVAILABLE AT THE MOMENT

€38.35

1188-E

WOODEN BITS for drilling the hammer heads

Ø 5,5 mm
Quantity unit: piece
UM: piece
€38.35

1188-F

WOODEN BITS for drilling the hammer heads

Ø 5,6 mm
Quantity unit: piece
UM: piece
€38.35

1188-G

WOODEN BITS for drilling the hammer heads

Ø 5,7 mm
Quantity unit: piece
UM: piece
€38.35

1188-H

WOODEN BITS for drilling the hammer heads

Ø 5,8 mm
Quantity unit: piece
UM: piece
NOT AVAILABLE AT THE MOMENT
€38.35

1188-L

WOODEN BITS for drilling the hammer heads

Ø 5,9 mm
Quantity unit: piece
UM: piece
€38.35

1189-A

HAMMER HEAD DRILL

Ø 5,1 mm
Quantity unit: piece
UM: piece
€5.85

1189-B

HAMMER HEAD DRILL

Ø 5,2 mm
Quantity unit: piece
UM: piece
€5.85

1189-C

HAMMER HEAD DRILL

Ø 5,3 mm
Quantity unit: piece
UM: piece
€5.85

1189-D

HAMMER HEAD DRILL

Ø 5,4 mm
Quantity unit: piece
UM: piece

€5.98

1189-E

HAMMER HEAD DRILL

Ø 5,5 mm
Quantity unit: piece
UM: piece
€5.98

1189-F

HAMMER HEAD DRILL

Ø 5,6 mm
Quantity unit: piece
UM: piece
€6.11

1189-G

HAMMER HEAD DRILL

Ø 5,7 mm
Quantity unit: piece
UM: piece
€6.11

1189-H

HAMMER HEAD DRILL

Ø 5,8 mm
Quantity unit: piece
UM: piece
€6.11

1189-L

HAMMER HEAD DRILL

Ø 5,9 mm
Quantity unit: piece
UM: piece
€6.24

1190

CUTTING DEVICE for felt and leather, changeable blade
Quantity unit: piece
UM: piece
€95.55

1190-A

REPLACEMENT BLADES (for art. 1190)

Quantity unit: piece
UM: piece
€16.25

1192

JAPANESE SAW
Saw: Length 70 mmQuantity unit: piece
UM: piece
€23.40

1193

JAPANESE SAW, flexible

Saw: Length 240 mm Width 84 mm Thick 0,45 mm
Quantity unit: piece
UM: piece
€65.65

1194

JAPANESE SAW, professional
Saw: Length 190 mm Width 0,3 mmQuantity unit: piece
UM: piece
€66.30

1195

JAPANESE SAW, compact, fine cut

Saw: Length 150 mm Width 30 mm Thick 0,3 mm
Quantity unit: piece
UM: piece
€51.35

1196

PIN BLOCK SUPPORT JACK used for supporting the pin block in grand pianos while driving in new tuning pins

Quantity unit: piece
UM: piece
€120.77

1198

ROUND AWL, for wood, conical tip

Quantity unit: piece
UM: piece
€7.54
Product added to wishlist
Product added to compare.