NEW PRODUCTS

SHORT DAMPER WIRE TOOL, for adjusting GP dampener iron near the heads in places that are hard to reach

DOUBLE HIGH DAMPING, applied to enhance sound attenuation between the low/mid-high compartment passage

CLAMP with HEATABLE JAWS, electronically powered with a USB cable. Used to assist in separating parts of mechanical assemblies (from the hammers butts, to the hammer shanks, to the hammer heads, etc.).

** Please note that it is not intended to replace traditional extractors or pliers (which are perfectly functional), but rather to aid in the separation of pieces by heating the clamps (at a non-aggressive average temperature), helping traditional extractors avoid damaging or breaking glued wooden parts. **

Cylindrical GROUND TIPS HSS DIN 338 ø 2,5 mm ideal for drilling or grinding hammer butts or flanges

Cylindrical GROUND TIPS HSS DIN 338 ø 2,0 mm ideal for drilling or grinding hammer butts or flanges

NOT AVAILABLE AT THE MOMENT

Cylindrical GROUND TIPS HSS DIN 338 ø 1,5 mm ideal for drilling or grinding hammer butts or flanges

Cylindrical GROUND TIPS HSS DIN 338 ø 1,0 mm ideal for drilling or grinding hammer butts or flanges

Cylindrical GROUND TIPS HSS DIN 338 ø 0,75 mm ideal for drilling or grinding hammer butts or flanges

SUSPENDED SUPPORT for grand piano mechanics, extra long type, in aluminum, (length, 51 cm ) bar to be fixed to the keyboard stand (with supplied compass ) recommended hole ø 8 mm

SUPPORT STAND for grand piano mechanics, in wood, (length, 40cm ) standard type

BENCH TOOL with DUAL COMBINED FUNCTION that allows, on one side, the adjustment of the grand piano action in its various measurements, while turned on the opposite side, it serves as a template, support, and alignment tool for gluing the grand piano hammers. It's simple, functional, and adjustable in its height and depth.

Quantity unit: piece
UM: piece

ALUMINUM GAUGE LEVELING ADJUSTER equipped with magnetic base to level strings

High black RUBBER, slightly convex head, for mod. YAMAHA

High brown RUBBER, slightly convex head, mod. for YAMAHA Upright pianos

SHAPED TEMPLATE with rounded semicircle recess for laterally sanding the external surfaces of the hammer with precision during intonation phase

HAMMER BUTTS for UP, YAMAHA type, with flanges, complete set

HAMMER BUTTS for UP, YAMAHA type, with flanges, piece

SYNTHETIC LEATHER of the highest quality for hammer butts, ocra yellow color, in strips

SYNTHETIC LEATHER of the highest quality for hammer butts

SYNTHETIC LEATHER of the highest quality for hammer butts

SYNTHETIC LEATHER STRIPES of the highest quality, precut, for hammer butts

Length. 22 x 0.9 mm approx. 2.0 mm Thick
90 pcs set

SYNTHETIC LEATHER STRIPES of the highest quality, precut, for hammer butts

Length. 25 x 0.9 mm approx. 2.0 mm Thick
90 pcs set

SYNTHETIC LEATHER STRIPES of the highest quality, precut, for hammer butts

Length. 30 x 0.9 mm approx. 2.0 mm Thick
90 pcs set

FLANGES for hammer butt, YAMAHA Type

FLANGES for hammer butt, YAMAHA Type, piece

Teflon SUPPORT with vertical cut and a hole that allows the insertion of the celeste cable control (hole ø 6 mm)

Teflon SUPPORT for celeste cable control with threaded hole ø 6 mm

CELESTE CABLE for UP piano, YAMAHA type, lenght 195 cm

REGULATON FRAME for damper wire for GP fixing a precise position to right and to left

BRASS AGRAFFES for GP, with thread, single chord, YAMAHA Type

BRASS AGRAFFES for GP, with thread, bichord, YAMAHA Type

BRASS AGRAFFES for GP, with thread, trichord, YAMAHA Type

BALANCE RAIL WASHERS, Kasimir, white, thickness 1,0 mm (set 90 pcs)

BALANCE RAIL WASHERS, Kasimir, white, thickness 1,5 mm (set 90 pcs)

WASHERS, facing cloth, olive greeen, thickness 1,2 mm

SYNTHETIC LEATHER for GP BACK CHECK, strips, ocra yellow, high quality

SYNTHETIC LEATHER for GP BACK CHECK, strips, ocra yellow, high quality

SYNTHETIC LEATHER for GP BACK CHECK, strips, ocra yellow, high quality

SYNTHETIC LEATHER for GP BACK CHECK, strips, ocra yellow, high quality

SYNTHETIC LEATHER for GP BACK CHECK, strips, ocra yellow, high quality

KEY COVERING, separated with fronton, DARK CREAM, in polished acrylic, ready to be glued, 7-1/4 octave

KEY COVERING, separated with fronton, DARK CREAM, in polished acrylic, ready to be glued, 7-1/4 octave

GRAND DAMPER LEVER WIRE FLANGE for GP, complete, with sostenuto, Stardard type

GRAND DAMPER LEVER WIRE FLANGE for GP, complete, with sostenuto, for Yamaha Type

KEY COVERING, separated with fronton, WHITE, in matt acrylic, ready to be glued, 7-1/4 octave

KEY COVERING, separated with fronton, CREAM, in acrylic, ready to be glued, 7-1/4 octave

KEY COVERING, separated with fronton, DARK CREAM, in matt acrylic, ready to be glued, 7-1/4 octave

WOODEN TOOL for clamping whole bone plates - with 4 compartments

TRANSMISSION LEVER COMMAND for SOSTENUTO PEDAL complete set

GRAND SHIFTER PLATES, PVC, for GP piano, Yamaha type, with adjusting screws 40 x 20 mm

BUTTERFLY SCREW for LATERAL BLOCKS, Yamaha piano type, with thread for wood

UP Music Desk Hinge, Yamaha type, brass  45 x 27 mm

UP Music Desk Hinge, Yamaha type, brass  45 x 27 mm (with guide point)

UP Music Desk Hinge, Kawai type, brass  45 x 27 mm

GP Music Desk Hinge, Yamaha type, brass 38X29 / 38X29 mm

HINGE for GP in polished brass with angle - Yamaha C2 - C3 type
(including screw set)

HINGE for GP in polished brass with angle - Yamaha C5 type
(including screw set)

HINGE for GP in polished brass with angle - Yamaha C7 type
(including screw set)

UP LOCK with semi rounded corners at the ends, length 78 x 15 mm

UPPER GP LOCK, lateral hole, upper plate + lower plate in brass, with semi-rounded corners at the ends, with supplied polished nickel-plated key, length 106 x 17 mm

RUBBER BOTTONS for GP pedal rod, Yamaha type 13,5 x 8,5 mm, Ø internal hole 8 mm

RUBBER BOTTONS for GP pedal rod, Kawai type ø 11>12 X 14 mm

PEDALS for GRAND PIANOS in polished brass, "YAMAHA" type, supplied with rubbers for rods
(sold in set - not separately)

PEDALS for UPRIGHT PIANOS in polished brass, mod. "Yamaha" sold
in sets (not separately)

Quantity unit: set

PEDAL BUSHING in nylon for internal pedal support of the pedalboard, for GP pianos, (KAWAI type)

PEDAL BUSHING in nylon for internal pedal support of the pedalboard, for GP pianos, (YAMAHA type)

GP WHEEL with TAIL in brass, with metal pin with conical interlocking.

Total height 104 mm

Height (brass part wheel) 58 mm

Wheel width 33 mm ø 44 mm

Unit quantity: each

TUNING STRIPS with REINFORCED quilting

TUNING LEVER HEAD without hammer tip, YAMAHA type (10° inclination) length. 45mm

NOT AVAILABLE AT THE MOMENT

PROFESSIONAL TUNING KEY - WATANABE with fixed shaft, in rosewood material (head and hammer tip excluded) to be assembled as desired

PROFESSIONAL TUNING KEY - WATANABE with extendable shaft, ergonomic handle, with ball-shaped finial, in rosewood, (head and hammer tip excluded) to be assembled as desired

PROFESSIONAL TUNING KEY - WATANABE with fixed shaft, ergonomic handle, with ball-shaped finial, in rosewood, (head and hammer tip excluded) to be assembled as desired

TUNING HAMMER TIP - WATANABE n. 1 (small hole) thread compatible with their own tuning lever heads only

TUNING HAMMER TIP - WATANABE n. 2 (medium hole) thread compatible with their own tuning lever heads only

TUNING HAMMER TIP - WATANABE n. 2 Y (medium-large hole) thread compatible with their own tuning lever heads only

TUNING HAMMER TIP - WATANABE n. 3 (large hole) thread compatible with their own tuning lever heads only

TUNING HAMMER TIP - WATANABE n. 1 extra long 60 mm (small hole) thread compatible with their own tuning lever heads only

TUNING HAMMER TIP - WATANABE n. 2 extra long 60 mm (medium hole) thread compatible with their own tuning lever heads only

NOT AVAILABLE AT THE MOMENT

TUNING HAMMER TIP - WATANABE n. 3 extra long 60 mm (big hole) thread compatible with their own tuning lever heads only

TUNING HAMMER TIP - WATANABE n. 2 extra long 70 mm (medium hole) thread compatible with their own tuning lever heads only

TUNING HAMMER TIP - WATANABE n. 2 extra long 80 mm (medium hole) thread compatible with their own tuning lever heads only

TUNING LEVER HEAD - WATANABE lenght 45 mm + 15° angle

TUNING LEVER HEAD - WATANABE lenght 45 mm + 10° angle

TUNING LEVER HEAD - WATANABE lenght 35 mm + 10° angle

TOOL for TIGHTENING the turns of the strings, with double bend at 45 ° approx. Wooden handle. It allows you to lean on a nearby tunning pin creating a lever with a minimum of effort

NOT AVAILABLE AT THE MOMENT