Your cart
There are no more items in your cart
Others
1107
FLANGE BUSHING BROACH SET
Ø 1,20 - 1,25 - 1,75 - 1,30 - 1,325 - 1,35 mm
Quantity unit: set 6 pcs
Quantity unit: set 6 pcs
UM: set
€45.37
1112
CENTRE PIN BOX, PLEXIGLASS, 12 sections (with centre pins) - NEW MODEL
Quantity unit: piece
UM: piece
€45.50
€36.40
1120
CENTRE PIN REPINNING TOOL used to remove and replace center pins quickly.
Quantity unit: piece
UM: piece
€49.01
€11.05
1124-A
ALCOHOL LAMP for hammer shanks, copper polished, steel end, with cotton wick
Quantity unit: piece
UM: piece
€55.25
1124-B
REPLACEMENT COTTON WICK, for alcohol lamp (for art. 1124 and 1124-A)
Quantity unit: 1 m
UM: metre
€1.43
1125
MINI TORCH for inspections - 2 led - magnetized for manual tools
Quantity unit: piece
UM: piece
€12.68
1142
HAMMER SHANK KNURLER. This tool is adjustable for any shank diameter as well as the length of the knurl - NEW VERSION
Quantity unit: piece
UM: piece
€180.70
1153
EASY LIFT braking system that allows you to close the cover top with minimal effort
Quantity unit: piece
UM: piece
ONLY ON ORDER
€325.00
1153-A
DEVICE for holding UP lids open, while tuning or servicing the piano, inside brass - outside felt, it holds the piano lid at 45º when you are tuning
Quantity unit: piece
UM: piece
€21.45
1154
UP KEYBOARD LID PROTECTOR it's not necessary to drill or screw it, just apply and stays in place with adhesive tape (easily removable)
Quantity unit: piece
UM: piece
€36.40
1155
UP KEYBOARD LID PROTECTOR is installed by piercing the hinge and the support of the cylinder (10 cm approx.), with a wood bit Ø 13 mm; same operation in the cylinder with a 4 mm drill bit.
Quantity unit: piece
UM: piece
€127.40
1155-A KIT
KIT for the installation of the keyboard lid protector (sold separately)
Quantity unit: set
UM: set
€39.00
€77.87
€90.87
€38.87
1168
KEY BUSHING WEDGE CLAMP it allows for faster and more professional looking rebushing jobs. It can be used on both the center and the front key bushing
Quantity unit: piece
UM: piece
€1.63
€97.37
1170-A
WEDGES FOR KEY BUSHING, synthetic material, yellow
Thickness 3,5 mm
Quantity unit: piece
Quantity unit: piece
UM: piece
€1.43
1170-B
WEDGES FOR KEY BUSHING, synthetic material, blue
Thickness 3,6 mm
Quantity unit: piece
Quantity unit: piece
UM: piece
€1.43
1170-C
WEDGES FOR KEY BUSHING, synthetic material, red
Thickness 3,7 mm
Quantity unit: piece
Quantity unit: piece
UM: piece
€1.43
1172-E
FLAT WEDGES for gluing the kasimir seals of the keyboard center
Length 35 mm Width 9 mm Thickness 3,4 mm
Quantity unit: piece
UM: piece
€1.43
1172-H
FLAT WEDGES for gluing the kasimir seals of the keyboard center
Length 35 mm Width 9 mm Thickness 3,7 mm
Quantity unit: piece
UM: piece
€1.43
€18.85
€20.67
1271-B
GP HAMMERS WOODEN SUPPORT usefull during pitching, size MEDIUM
Quantity unit: piece
UM: piece
€14.95
1271-C
WOODEN SUPPORT to pitch the hammers of the Upright piano, with the mechanics inclined on the piano
Quantity unit: piece
UM: piece
€18.85
€51.35
1310
HYDROCEEL internal air humidifier, equipped by 2 hooks (1 pair = 2 pieces), 1 refilling bag in PVC
Length 100 cm
Quantity unit: piece
UM: piece
€101.40
€63.70
992-C
STRING LOOPING MACHINE to make 'French' EYELETS (to be held still between a vice) - type C
Quantity unit: piece
UM: piece
€319.15
