Your cart
There are no more items in your cart
Tools
€90.35
1004
CUTTING PLIERS with extra tempered SIDE CUTTERS - WITHOUT CHAMFER - for cutting center pins (only soft metal)
Quantity unit: piece
UM: piece
€41.60
1011
MUSIC WIRE CUTTER cuts with smooth finish and adjustable clamping fixture which holds the material being cut perpendicular to the cutter jaws
Quantity unit: piece
UM: piece
€69.55
1017
PLIERS for WIRE BENDING allows to bend action wires and flanges for Viennese to the left and to the right, with multiplier
Quantity unit: piece
UM: piece
€51.35
1021
PLIERS for WIRE BENDING allows to bend action wires to the left and to the right, with multiplier
Quantity unit: piece
UM: piece
€81.77
1022
PLIERS for WIRE BENDING allows forward or backward bending of brindle wires
Quantity unit: piece
UM: piece
€138.97
1024
HAMMER SHANK CUTTER, razon sharp blade allows for fast, easy efficient cutting to length hammer shanks
Quantity unit: piece
UM: piece
€17.55
1025
CENTER PIN PLIER constructed to have perfect parallel action to remove and be able to place center pins, without tearing the felt bushing. It comes with an inserter pin and an adjustable extracting pin assembly
Quantity unit: piece
UM: piece
€97.50
1028
PARALLEL PLIER, can be used in spacing action parts like back checks, hammer heads ecc., grip plastic covered
Length 195 mm Opening approx. 9 mm
Quantity unit: piece
Quantity unit: piece
UM: piece
€64.35
1034
FLAT NOSE PLIERS, parallel /key easing pliers to quickly work either side of the key without removing the key from the piano
Quantity unit: piece
UM: piece
€89.05
1040
COMBINATION TOOL HANDLE, octagon plastic multi-purpose handle that fits the entire set of regulating tools. Tools are secured and released by slight of compressing nut
Quantity unit: piece
UM: piece
€50.18
1040-A
ROSEWOOD COMBINATION HANDLE, octagon rosewood multi-purpose handle that fits the entire set of regulating tools. Tools are secured and released by slight of compressing nut
Quantity unit: piece
UM: piece
€48.75
1040-B
REGULATING SCREWDRIVER for regulating screws (UP), flexible - type: long
Length 285 mm
Quantity unit: piece
Quantity unit: piece
UM: piece
NOT AVAILABLE AT THE MOMENT
€25.35
1040-BP
REGULATING SCREWDRIVER for regulating screws (UP), flexible version - type: short
Length 215 mm
Quantity unit: piece
Quantity unit: piece
UM: piece
€25.35
1040-BS
REGULATING SCREWDRIVER for regulating bottons (GP), flexible version - type: long
Length 285 mm
Quantity unit: piece
Quantity unit: piece
UM: piece
€25.35
1040-BST
REGULATING SCREWDRIVER for regulating bottons (GP), flexible version - type: short
Length 215 mm
Quantity unit: piece
Quantity unit: piece
UM: piece
€25.35
1040-CP
REGULATING SCREWDRIVER for flathead screws, flexible version - type: short
Length 215 mm
Quantity unit: piece
Quantity unit: piece
UM: piece
€26.65
1040-E
OFFSET KEY SPACER for oval key pins. The offset makes it easy to reach past the front row of key pins when twisting or bending pins under the sharp keys
Quantity unit: piece
UM: piece
€27.95
1040-F
SPOON BENDER (UP) for ease in adjusting the spoon. The angle of this tool facilities getting under and around the whippens without removing the piano action
Quantity unit: piece
UM: piece
€27.95
1040-LX
BENT TOOL, fine shank, ideal to intervene where there are little spaces between the rods of the mechanical
Quantity unit: piece
UM: piece
€27.95
1040-LX
BENT TOOL, fine shank, ideal to intervene where there are little spaces between the rods of the mechanical
Quantity unit: piece
UM: piece
€25.35
1040-XK
FACETED TOOL slightly inclined to bend the rods of the dampers or anything else that may require a particular equipment
Quantity unit: piece
UM: piece
€27.95
1040-XKL
STRAIGHT FACETED TOOL to bend the rods of dampers - generic regulation
Quantity unit: piece
UM: piece
€26.65
1045-B
REGULATING SCREWDRIVER for regulating screws (UP), wooden handle, flexible - type: long
Length 285 mm
Quantity unit: piece
Quantity unit: piece
UM: piece
€22.75
1045-BP
REGULATING SCREWDRIVER for regulating screws (UP), wooden handle, flexible - type: short
Length 215 mm
Quantity unit: piece
Quantity unit: piece
UM: piece
€22.75
1045-BS
REGULATING SCREWDRIVER for regulating bottons (GP), wooden handle, flexible version - type: long
Length 285 mm
Quantity unit: piece
Quantity unit: piece
UM: piece
€22.75
1045-BST
REGULATING SCREWDRIVER for regulating bottons (GP), wooden handle, flexible version - type: short
Length 215 mm
Quantity unit: piece
Quantity unit: piece
UM: piece
€22.75
1045-C
REGULATING SCREWDRIVER for flathead screws, wooden handle, flexible version - type: long
Length 285 mm
Quantity unit: piece
Quantity unit: piece
UM: piece
€23.40
1045-CP
REGULATING SCREWDRIVER for flathead screws, wooden handle, flexible version - type: short
Length 215 mm
Quantity unit: piece
Quantity unit: piece
UM: piece
€23.40
€24.70
€24.05
€21.45
1045-EKL
REGULATOR for guide pins, front row of key pins, wooden handle, straight
Quantity unit: piece
UM: piece
€33.15
1045-LX
BENT TOOL, fine shank, ideal to intervene where there are little spaces between the rods of the mechanical
Quantity unit: piece
UM: piece
€22.75
€27.30
€29.25
1045-S
SCREWDRIVER for slitted screws, wooden handle, small
Length 125 mm
Quantity unit: piece
Quantity unit: piece
UM: piece
€17.55
€28.47
€27.95
1045-XK
FACETED TOOL slightly inclined to bend the rods of the dampers or anything else that may require a particular equipment
Quantity unit: piece
UM: piece
€23.40
1045-XKL
STRAIGHT FACETED TOOL to bend the rods of dampers - generic regulation
Quantity unit: piece
UM: piece
€23.40
1045-Y
TOOL for adjusting the support rods of dampers for "bayonet" piano mechanics
Quantity unit: piece
UM: piece
€40.30
1045-YK
BENT TOOL to adjust the rods of mechanics - generic adjustment
Quantity unit: piece
UM: piece
€24.05
